Estate Swing Bedienerhandbuch PDF herunterladen (Seite 9)

E-S 1000D Series Instruction Manual

Tools Needed for Installation

1.4

• Power Drill

• Crescent Wrench

• Flat Head Screwdriver

• Hacksaw/Sawzall

• Phillips Head Screwdriver

• Small Flathead Screwdriver

• C-Ring Pliers

• Tape Measure

• Level

• Wire Strippers

• C-clamps

• 3/8”, 1/4”, 5/16” Drill Bits

Other items may be needed prior to commencing installation. Bolded items are necessary to all appli-

cations.

• Positive post, bracket or door stop. Although the Estate Swing 1000 features built in limit switches it is

highly recommended to have positive stops.

• 16 gauge, 2 conductor stranded direct burial low voltage wire will be required to run power to your

battery. Length is determined by distance between transformer or solar power supply and the control

box.

• 4 - 3/8” Carriage Bolts will be needed to connect the 2 “L” shaped brackets to the post. Length will

be determined by the size of your posts.

• A metal support bracket may be needed to achieve the appropriate desired setback. The metal

support bracket will be bolted or welded to your post to give a larger amount of space to mount the

provided mounting bracket.

• A voltage meter and digital camera may be necessary to run diagnostic checks.

• If your transformer is going to be plugged into an outdoor outlet you will need to weatherproof that

outlet and transformer. Electrical boxes or plug covers can be obtained from a local hardware store

to accommodate both the plug and transformer.

• Hardware to attach the control box to a post or fence.

• Wire strain reliefs for running wires into control box.

Protect all ongoing and outgoing wires with a surge suppressor.

Consult your local dealer for more information.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 56 57

Keine Kommentare

Estate Swing Bedienerhandbuch Seite 9