Estate Swing Bedienerhandbuch PDF herunterladen (Seite 39)

E-S 1000D Series Instruction Manual

Determine Run Time

4.2

Once you complete the first run, press the button and actuate your gate

a few times. When the gate stops on the limits: If the gate has stopped

short of or further than desired position, adjust the limit switches:

After you have your limits in the correct position secure the position of

the switches with the screws and run your gate through a few cycles. On

the display you will see a count while the arms are moving. This is your

run time. Record your run time below.

Actual Run Time: _____________________________

Note: The above example is for Pull-To-Open operation. If

you are installing your gate opener as Push-To-Open then

the open limit will be reverse of the above.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 56 57

Keine Kommentare

Estate Swing Bedienerhandbuch Seite 39