Estate Swing Bedienerhandbuch PDF herunterladen (Seite 34)

E-S 1000D Series Instruction Manual

Temporary Safety Jumpers & Dip Switch Settings

3.8

If you are not using a safety device like a pho-

to eye or safety loop the Photocell terminal

must remain jumped to the GND terminal.

Dip Switches—To change any dip switches, you must turn the power off before

changing the setting.

ON: Auto-Close on (the gate will re-close

from the open position after a time set in

the programming section)

OFF: Auto-Close off

ON: Dual gate opener (2 motors)

OFF: Single gate opener (1 motor)

ON: Gate lock terminals active

OFF: Gate lock terminals inactive

IMPORTANT: We recommend before turning the

gate opener on for the first time to have dip switch

1 OFF. If the dip switch is set to on, the gate will au-

to-reclose after turning it on without any intentional

activation on your part.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 56 57

Keine Kommentare

Estate Swing Bedienerhandbuch Seite 34