Estate Swing Bedienerhandbuch

USER DRIVEN MANUAL* Any feedback, changes, or advice, we are glad to hear it. Please contact us at [email protected] — WARNING — Read all ins

E-S 300 / 302 Classic Series Instruction Manual SECTION 2: Installation of Mounting Brackets

E-S 300 / 302 Classic Series Instruction Manual Manual Operation 2.1 1) Lift lock cover cap off. 2) Insert and turn provided key. 3) The operator c

E-S 300 / 302 Classic Series Instruction Manual IMPORTANT: Pull to Open Operation 2.2 This means the gate operator is mounted on the inside of the

E-S 300 / 302 Classic Series Instruction Manual IMPORTANT: Pull to Open Operation 2.3 Below are 2 common examples of setback mountings. These are not

E-S 300 / 302 Classic Series Instruction Manual Installation of Operator —Pull-to-Open 2.4 1) Locate the set back template found in the box to deter

E-S 300 / 302 Classic Series Instruction Manual Installation of Operator —Pull-to-Open 2.5 5) Utilizing a level, mark a line on the post that

E-S 300 / 302 Classic Series Instruction Manual Installation of Operator —Pull-to-Open 2.6 Before permanently attaching any brackets, be sure to test

E-S 300 / 302 Classic Series Instruction Manual Installation of Operator —Pull-to-Open 2.7 Before permanently attaching any brackets, be sure to test

E-S 300 / 302 Classic Series Instruction Manual IMPORTANT: Push-to-Open Operation 2.8 This operation is commonly used if your driveway slopes up after

E-S 300 / 302 Classic Series Instruction Manual Estate Swing Summary of Functions The Estate Swing is only to be used for vehicular swing gates in a C

E-S 300 / 302 Classic Series Instruction Manual IMPORTANT: Determining Correct Setback 2.9 Below are 2 common examples of setback mountings. These are

E-S 300 / 302 Classic Series Instruction Manual Installation of Operator — Push-to-Open 2.10 1) Locate the set back template found in the box to

E-S 300 / 302 Classic Series Instruction Manual Installation of Operator — Push-to-Open 2.11 5) Utilizing a level, mark a line on the post tha

E-S 300 / 302 Classic Series Instruction Manual Installation of Operator — Push-to-Open 2.12 Before permanently attaching any brackets, be sure to tes

E-S 300 / 302 Classic Series Instruction Manual Installation of Operator — Push-to-Open 2.13 Before permanently attaching any brackets, be sure to tes

E-S 300 / 302 Classic Series Instruction Manual SECTION 3: Gate Operator Mounting, Wiring Motors & Power

E-S 300 / 302 Classic Series Instruction Manual Mounting Gate Operator (s) 3.1 1) Slide the rear of the gate operator into the boomerang bracket.

E-S 300 / 302 Classic Series Instruction Manual Check Usage of Stroke 3.2 1) Manually unlock the gate operator. 2) Physically swing the gate operator

E-S 300 / 302 Classic Series Instruction Manual Control Box & Running Wires 3.3 Control Box Mounting: • The control box can be mounted on a post o

E-S 300 / 302 Classic Series Instruction Manual Table of Contents The table of contents are listed to assist you locating a desired section. We do how

E-S 300 / 302 Classic Series Instruction Manual Easy Wiring Under Driveway 3.4 This portion of the manual will explain how to create an easy conduit f

E-S 300 / 302 Classic Series Instruction Manual 3.5 For Your Convenience The green terminal strips on the control board are easily removed for wiring.

E-S 300 / 302 Classic Series Instruction Manual 3.6 Wiring the Operator Arm (s) For a dual gate, use the provided wire to connect the secondary motor

E-S 300 / 302 Classic Series Instruction Manual 3.7 Wiring the Operator Arm (s) For a dual gate, use the provided wire to connect the secondary motor

E-S 300 / 302 Classic Series Instruction Manual 3.8 Temporary Safety Jumpers & Dip Switch Settings If you are not using a safety device like a pho

E-S 300 / 302 Classic Series Instruction Manual 3.9 Power The Estate Swing E-S 300 comes with 1) 24V transformer. The transformer supplied has 2 scre

E-S 300 / 302 Classic Series Instruction Manual SECTION 4: Start Up and Operation

E-S 300 / 302 Classic Series Instruction Manual 4.1 Find Limit Positions 1. Manually release the gate and move the gate to the desired closed position

E-S 300 / 302 Classic Series Instruction Manual 4.2 First Run This is our recommended procedure to run the gate for the first time. PUSH 1 or PUSH 2 t

E-S 300 / 302 Classic Series Instruction Manual SECTION 1: Review of Specifications, Warnings, and Tools

E-S 300 / 302 Classic Series Instruction Manual 4.3 Determine Run Time Once you complete the first run, press the button and actuate your gate a few t

E-S 300 / 302 Classic Series Instruction Manual 4.4 Operating Parameters Customization 1. LED shows P1: P1 is for setting your run time. The run time

E-S 300 / 302 Classic Series Instruction Manual 4.5 433 Plug-in Receiver 1. With the red plug already inside the control box, run the grey receiver

E-S 300 / 302 Classic Series Instruction Manual 4.6 433 Plug-in Receiver 5. Plug the white clip inside the control box into the control board. The gro

E-S 300 / 302 Classic Series Instruction Manual SECTION 5: Maintenance, Troubleshooting & Accessories

E-S 300 / 302 Classic Series Instruction Manual 5.1 Maintenance 1) Lubricate the rear pivot and front pivot of the bracket. 2) Lubricate the gate hin

E-S 300 / 302 Classic Series Instruction Manual 5.2 Troubleshooting If the gate opener will not move but the board is counting the run time: • Check

E-S 300 / 302 Classic Series Instruction Manual 5.3 Troubleshooting The gate opener is not stopping on the limit switches: • Remove all pre-instal

E-S 300 / 302 Classic Series Instruction Manual 5.4 Troubleshooting If you call in for technical support or warranty support: Before any contr

E-S 300 / 302 Classic Series Instruction Manual 5.5 Control Board Overview CAUTION! Do not run 110V AC power direct to the board. This will cause perm

E-S 300 / 302 Classic Series Instruction Manual 5.6 Control Board Overview CAUTION! Do not run 110V AC power direct to the board. This will cause perm

E-S 300 / 302 Classic Series Instruction Manual 5.7 Control Board Overview Light: Sends pulses of 24VDC only while gate is running, and whether it is

E-S 300 / 302 Classic Series Instruction Manual 5.8 Control Board Overview CAUTION! Do not run 110V AC power direct to the board. This will cause perm

E-S 300 / 302 Classic Series Instruction Manual 5.9 Accessories Wiring The manufacturer instructions that come with your accessory should have marking

E-S 300 / 302 Classic Series Instruction Manual 5.10 Accessories Wiring Photo Eye, Safety Edge, Safety Loop: Normally Closed (NC) of safety device =

E-S 300 / 302 Classic Series Instruction Manual Specifications MODEL Estate Swing E-S 300 / 302 Power Supply 24V AC, 50VA to 120 VA Backup Battery V

E-S 300 / 302 Classic Series Instruction Manual Estate Swing Parts List 1.2 A. Control Box with Control Board B. Operator Arm with 42” of Wire C. Key

E-S 300 / 302 Classic Series Instruction Manual Standard System Overview and Safety Zone 1.3 The system displayed below is a recommended standard syst

E-S 300 / 302 Classic Series Instruction Manual Tools Needed for Installation 1.4 • Power Drill • Crescent Wrench • Flat Head Screwdriver • Hacksaw/Sa