Estate Swing Bedienerhandbuch PDF herunterladen (Seite 7)

Tools Needed for Installation

E-S 500 / 502 Classic Series Instruction Manual

1.4

Other items may be needed prior to commencing installation. BOLDED items are

necessary to all applications.

• Positive post, bracket or door stop. Although the Estate Swing 300 features built in

limit switches.

• 16, 14 or 12 gauge, 2 conductor stranded direct burial low voltage wire will be

required to run power to your operator. Length and gauge are determined by

distance between transformer power supply and the control box.

• 4 - 3/8” Carriage Bolts will be needed to connect the 2 “L” shaped brackets to the

post. Length will be determined by the size of your posts.

• A metal support bracket may be needed to achieve the appropriate desired

setback. The metal support bracket will be bolted or welded to your post to give a

larger amount of space to mount the provided mounting bracket.

• A voltage meter and digital camera may be necessary to run diagnostic checks.

• If your transformer is going to be plugged into an outdoor outlet you will need to

weatherproof that outlet and transformer. Electrical boxes or plug covers can be

obtained from a local hardware store to accommodate both the plug and

transformer.

• Hardware to attach the control box to a post or fence.

• Watertight connectors for running wires into the control box.

• Power Drill

• Crescent Wrench

• Flat Head Screwdriver

• Hacksaw

• Phillips Head

• Screwdriver

• C-Ring Pliers

• Tape Measure

• Level

• Wire Strippers

• C-clamps

• 3/8”, 1/4”, 5/16” Drill Bits

1 2 3 4 5 6 7 8 9 10 11 12 ... 29 30

Keine Kommentare

Estate Swing Bedienerhandbuch Seite 7