Estate Swing Bedienerhandbuch PDF herunterladen (Seite 18)

Temporary Safety Jumpers & Dip Switch Settings

E-S 500 / 502 Classic Series Instruction Manual

3.4

If you are not using a safety

device like a photo eye or safety

loop the Photocell terminal must

remain jumped to the GND

terminal.

If you are using a SINGLE gate

installation the LIMIT 2 terminals

must remain jumped together.

For a DUAL gate jumpers must be

removed from limit terminals and

limit switch wires inserted.

IMPORTANT: We recommend before turning the gate

opener on for the first time to have dip switch 1 OFF. If

the dip switch is set to on, the gate will autoreclose

after turning it on without any intentional activation on

your part.

ON: Auto-close on (the gate will re-close

from the open position after a time set in

the programming section)

OFF: Auto-Close off

ON: Dual gate opener (2 motors)

OFF: Single gate opener (1 motor)

Dip Switches—To change either dip switch you must turn the

power off before changing the setting.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 29 30

Keine Kommentare

Estate Swing Bedienerhandbuch Seite 18