Estate Swing Bedienerhandbuch PDF herunterladen (Seite 25)

Fine tuning Limit Switches - Push-to-Open

If the light does not go out before a physical limitation is reached, decrease the stroke length.

Open Position Adjustment

• Move the gate slowly to the Open

position (fig 1) until the FCA1 light

goes OFF (fig 2).

(FCA2 if working on the slave leaf of dual

opener)

• To increase the stroke length turn the

FCC screw:

CLOCKWISE (fig 3).

(make the gate open more)

• To decrease the stroke length turn the

FCC screw:

COUNTER-CLOCKWISE (fig 3).

(make the gate open less)

(fig 1)

(fig 2)

(fig 3)

Closed Position Adjustment

• Move the gate slowly to the Closed

position (fig 1) until the FCC1 light

goes OFF (fig 2).

(FCC2 if working on the slave leaf of dual

opener)

• To increase the stroke length turn the

FCA screw:

COUNTER-CLOCKWISE (fig 3).

(make the gate close more)

• To decrease the stroke length turn the

FCA screw:

CLOCKWISE (fig 3).

(make the gate close less)

(fig 1)

(fig 2)

(fig 3)

4.8

NOTE: On Push-To-Open FCA on the board matches up with FCC on the Arm and

FCC on the board matches up with FCA on the Arm

Follow the printed directions for adjusting limits, this is not a typo.

2.16

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 47 48

Keine Kommentare

Estate Swing Bedienerhandbuch Seite 25