Estate Swing Bedienungsanleitung PDF herunterladen (Seite 22)

Auxiliary: Land Line Only (cont)

Programming USER via phone call:

To program [Example number 2222222226 into position 03] in the list:

Press *5# (A short beep ~ success)

Then you can input the phone number 2222222226# (A short beep ~ success)

And 2222222226 is programmed into list 6

If the change has not been successful you will hear 3 beeps and must re-enter again.

__________________________________________________________________________________

Changing Passcode via phone call:

The system only allows the 3 manager numbers as authorized user to change the 6 digits password.

To change the password from the factory default 123456 to 654321 (Example) you can just call the unit and when the unit replies,

you can use the following commands using the keypad prompts on your telephone.

Once the call has connected … (With a short beep ~ prompt the administrator to enter password, the initial set up password is

123456 by default)

After enter password… (Another short beep ~Password Correct)

Press *2# (A short beep ~ success)

Then input the current password 123456# (you should hear a short beep ~success)

Continue to enter new password 654321# for 2 times (another short beep if password entered correctly)

If the change has not been successful you will hear 3 beeps and must re-enter again.

__________________________________________________________________________________

Resetting forgotten passcode

To manually reset the unit, you can press and hold on the “Call” button and turn on the unit for 10 seconds. The unit will displays

Wait… and then OK, the unit is reset.

Guest:

2222222226

Diagnostic display read out below

In order for a call into the gate to open the gate without a passcode you will need to set

up a cell phone temporarily as a Administrator and text the unit *ANY?#1

1 2 ... 17 18 19 20 21 22 23

Keine Kommentare

Estate Swing Bedienungsanleitung Seite 22