Estate Swing Bedienerhandbuch PDF herunterladen (Seite 34)

E-S 300 / 302 Classic Series Instruction Manual

3.8

Temporary Safety Jumpers & Dip Switch Settings

If you are not using a safety device like

a photo eye or safety loop the Photocell

terminal must remain jumped to the

GND terminal.

Dip Switches—To change any dip switches, you must turn the power

off before changing the setting.

ON: Auto-close on (the gate will re-close from

the open position after a time set in the pro-

gramming section)

OFF: Auto-Close off

ON: Dual gate opener (2 motors)

OFF: Single gate opener (1 motor)

ON: Electric Lock being used

OFF: Electric Lock not used

IMPORTANT: We recommend before turning the gate opener

on for the first time to have dip switch 1 OFF. If the dip switch is

set to on, the gate will auto-reclose after turning it on without

any intentional activation on your part.

Photo jumped to GND

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 54 55

Keine Kommentare

Estate Swing Bedienerhandbuch Seite 34